Page 19 - Plastic Process Equipment, Inc
P. 19
SPRUE PICKING SWING-ARM ROBOTS
PHOENIX Series - Single Stage & Telescopic Arm
High Speed, High Efficiency, Low Noise, Long Use Life, Super Economy
Phoenix series swing-arm robots with Single Stage and Telescopic
Type:
Vertical stroke of Single Stage has a 350/450/550/650mm stroke,
suitable for all types of horizontal injection machines under 150T.
Vertical stroke of Telescopic Type has a 650/750/850/950mm stroke,
suitable for horizontal injection machines under 400T. Full function
robot comes with vacuum generator and standard End of Arm
Tooling, with twist, grip and vacuum functions.
• Vertical Arm: With alloyed aluminum structure beam and linear
slide rail.
• Super strong structure, wear resistance, abiding, low vibration,
long use life.
• Precision aluminum alloy parts, completely modular design.
• Easy to adjust the direction of Swivel-out by using a wrench, no
need to change tube and switch; saves time.
• Just loosen the screws by a wrench, and the machine can be Precision Aluminum Castings
rotated out of the way for mold change. It’s convenient and fast to The Phoenix Series Swing-Arm Robots are constructed on a
reduce idle time. modular principle to ensure high precision and lightness. Most of
the parts are manufactured from aluminum alloy by either precision
PENDANT #RBD1019 casting or extrusion.
4 LINE LCD
DISPLAY BOLD STATUS
INFORMATION DISPLAYED
IN PLAIN ENGLISH,
NOT ERROR
CODES!
Microprocessor Hand-Held Pendant Controller
The microprocessor based control system provides a hand-held
pendant controller. Six (6) visible LED monitors which indicate motion
inputs and outputs of machine and robot are located on the controller
for maximum ease of operation.
A large four (4) line LCD display provides simple programming and
setting of all parameters. There are eight (8) standard programs of
preset motion sequences that are installed and additionally, up to
twelve (12) “Teach” programs (created by the operator) can be Telescopic Vertical Arm (VW Models)
stored. The built-in memory can record up to fifty (50) sets of mold Unlike the single-stage vertical arm, the telescopic version uses a
set-ups making this series of robots fully capable of meeting nearly unique Nylon belt transmission mechanism inside the vertical arm
all processing requirements. assembly, which rides on a linear slide-rail for extremely fast moving
speed. This design is particularly suitable for low headroom
Spare output ports are available for controlling various auxiliary installations or where a long stroke is required.
equipment such as: conveyor indexing, silicone spraying and de-
gating, etc. Audible and visible operational fault diagnoses are
included as standard. Operational sequences, setup parameters
and programs are permanently saved even if power is shut off.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
19